LPC1768 ARM Cortex M3 Development Board Blue Board- LPC1768 is an evaluation board for LPC1768 CORTEX M3 based microcontroller. The LPC1768 microcontroller has 512KB of internal flash and 64KB SRAM. Following are the salient features of the board. Dimensions: 106 X 108 mm2 Two layer PCB (FR-4 material) Power supply: DC 9V with power LED On-board linear regulators generate 3.3V/500mA and 5v/500mA from power supply. USB connector (as alternate power source). Connectors: Extension headers for all microcontroller pins. RS232 connectors (2). PS/2 connector. JTAG connector. SD/MMC connector. USB A-Type USB B-Type connector with Link-LED. Other Peripherals: 2 line X 16 character LCD with back light control. Configurable for manual and automatic program download (ISP) via serial port. User Interrupt, ADC, RTC. 2: System Requirements for LPC1768: Windows XP & Win 7 Serial or Parallel port USB port 3: Starting off & connecting the hardware: After unpacking the LPC1768 board connect a DC supply of 9V/1A to the DC jack to power the board. The LPC1768board can also be powered through USB. 4: Programming LPC1768 ARM Cortex M3 Development Board: LPC1768 Board can be programmed through serial port UART “0” using “Flash Magic” is a freeware windows utility used to download the hex file format onto the LPC1768 Board. If your PC does not have a serial port; use an original USB to serial converter to download the hex file. Programming LPC1768 Board through ISP. The LPC1768 Board can be programmed through ISP Manual Mode. To program in Manual mode you need a half serial cable (which just has TX, RX and GND wire connected). And connect the half serial cable to UART0 and power the board. Open Flash Magic. Select Device as LPC1768 Select the appropriate com port (See your “device manager” to find out the com port number) Select the Baud Rate in between 9600 and 38400 Interface: None (ISP) Oscillator (MHz): 12 Browse File name and Select the hex file to be downloaded. Click on Start. To make the board enter programming mode Hold down ISP and RESET Buttons, then release RESET first and finally ISP. Click on Start Programming. Program uploaded successfully. Click the Rest Button on the Board. That’s it, your hex file is on the board. Package Includes: 1 Piece of LPC1768 ARM Cortex M3 Development Board complete Set with USB to Serial, USB Cable and 9V Power Adapter. DOWNLOAD CD for LPC1768 Click here to find out more about LPC1768 SKU: G-3 Categories: ARM, GL Products
